A good piece of acrylic material determines a high-quality acrylic product, it is obvious. If you choose inferior acrylic materials, the processed acrylic products will be deformed, yellowed, and blackened, or the processed acrylic products will be many defective products. These problems are directly related to the selection of acrylic materials.
Below I will introduce several methods for judging the quality of acrylic cream bottles for everyone to distinguish in the future.
The first observation method:
This is a method of judging based on the material characteristics of acrylic itself. When we buy acrylic, we can check whether the acrylic board has slight fading or low gloss. If there is, it means that the quality of acrylic is not good. In addition to this observation method, you can also check whether the acrylic manual matches the actual situation of the acrylic sheet. If it is inconsistent, it can also be judged that the acrylic material is irregular.
The second burning method:
You can use a small piece of acrylic for a burn test. If the acrylic board burns quickly, it means that the quality of the acrylic is not good.
The third light transmission method:
This method stems from the light-transmitting properties of acrylic. It can emit white light through the light through the acrylic plate. If yellow or blue is found, it means that the quality of the acrylic is not up to standard. Because the light transmittance of the acrylic plate is very high, the light that passes through is positive white light and will not absorb light color.
The fourth pasting method:
This method is also called the hot melt method, which is distinguished by the difference in the degree of adhesion between good acrylic materials and bad acrylic materials. For example, poor-quality acrylic materials will stick together after being melted and are difficult to separate, while good-quality acrylic materials can be easily separated.
The fifth packaging method:
the soft rubber edge packaging of good quality acrylic material is very good, but the soft rubber edge of bad acrylic sheet looks very mixed. This kind of industry is called joint venture sheet. Of course, the price of a well-packed acrylic sheet is definitely more expensive than that of a poor acrylic.
When we produce acrylic cream bottles, we use these identification methods to ensure the quality of our raw materials. It is also a five-point method for identifying the quality of acrylic plates that has been summed up in practice over the years. At the same time, we hope to get corrections and suggestions from peers or experts Replenish.
Post time: Jun-26-2023